Product Selection Chart
Strengthen | Average | ||||||
Model | Standard (Red) | Standard (Sliver) | Standard with OBD Adaptor | Standard (Linux) | Pro (Upgraded) | USBCAN-2A | USBCAN-2C |
Physical Picture | |||||||
Shell Material | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Engineering Plastics | Engineering Plastics |
Color | Red | Sliver | Red/Silver (Optional) | Red | Red | White | White |
CAN Channel Count | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Relay and Transparent Transmission Functions | Support | Support | Support | Support | Support | - | - |
Industrial Grade | √ | √ | √ | √ | √ | - | √ |
2500V Isolated Withstand Voltage | Fully Isolated | Fully Isolated | Fully Isolated | Fully Isolated | Fully Isolated | - | Single Isolated |
3D Flame Retardant Insulation Bezel | √ | √ | √ | √ | √ | - | - |
Windows System | Support | Support | Support | Support | Support | Support | Support |
Linux System | - | - | - | Support | Support | - | - |
Low Speed/Fault Tolerance Single Line CAN | - | - | - | - | Support | - | - |
Petrol VehicleISO15765 Protocol | - | - | - | - | Support | - | - |
CANOpen J1939 DeviceNet | Support | Support | Support | Support | Support | - | - |
120 Ohm Termination Resistor | Built-In (Switch Control) | Built-In (Switch Control) | Built-In ( Switch Control) | Built-In (Switch Control) | Built-In (Switch Control) | Built-in (Shorted Control ) | Built-in (Shorted Control ) |
Product Characteristics | 2 More OBD Adapters Than Supreme Edition | More Linux support than Supreme Edition | Measurement of All Types of CAN Wires, Resolution of ISO 15765 Protocols for Petrol Cars | Low cost, Suitable for Use in Interference-Free Environments | Low-Cost Band Segregation | ||
Accessory | Standard Kits | Standard Kits | Standard Accessory Kit OBD Adaptor*2 | Standard Kits | Standard Accessory Kit OBD Adaptor*2 | Standard Kits | Standard Kits |
Price | ¥270 | ¥270 | ¥280 | ¥320 | ¥449 | ¥140 | ¥198 |
Model: CANalyst-II Analyzer (Standard)
Performance and Technical Specifications
USB to CAN Bus Protocol Conversion;
2 CAN Interfaces Available
USB interface supports USB3.0, USB2.0, compatible with USB1.1;
Support CAN2.0A and CAN2.0B protocols, support standard and extended frames; support data frame, remote frame format;
Supports bi-directional transmission, CAN transmit, CAN receive;
CAN controller baud rate is selectable between 10Kbps-1Mbps and can be configured by software;
The CANalyst-II analyzer (Supreme Edition) features high-speed magnetic coupling to isolate two CANs, a double isolated DC-DC power supply, and three-terminal full isolation. The USB and the two CANs are isolated separately, and CAN1 and CAN2 are completely isolated from each
other.
Isolation voltage level: 2500V;
CAN1 channel built-in GDT ceramic discharge tube, which can effectively release the inrush current;
Built-in common mode coil/common mode inductor for both CAN channels, which greatly improves the anti-interference ability;
It supports relay function, transparent transmission function and 2500V isolation between CAN1 and CAN2;
Traffic:When both CAN channels are active, they can receive and transmit up to 8500 frames per second each. Additionally, the USB speed can reach up to 17000 frames per second without losing any frames.
USB bus direct power supply, no need for external power supply;
Operating Temperature: -40 ~ 85 ℃;
Case Size: 104*70*25mm.
Product Compatibility: function library compatible with Guangzhou Chou Ligong / Zhiyuan Electronic Company ZLG-USBCAN interface adapter.
The CANalyst-II (Standard) analyzer enables direct configuration, transmission, and reception of CAN buses using the supplied USBCANTools software. Users can also write their own applications and develop CAN system software products using the provided DLL dynamic link library, VC/VB, and other routines.
When using the CANalyst-II analyzer (Standard) for secondary software development, there is no need to understand the complex communication protocol of the USB interface.