I. Power Supply
1. Battery Powered: Built-in 2500mAh high-capacity battery, can run for 15 hours without power supply.
2. USB Powered: 5V power supply through USB cable, can be connected to mobile phone charger/computer.
3. DC Power Supply: 9V-35V wide range power supply, 0.5A.
II. Main Function
1. Offline Recording: All CAN bus data can be recorded without the need for a computer connection.
2. TF Card Storage: Standard 32G SanDisk class 10 high-speed TF card, can store 350 million frames of CAN data.
3. TF card storage capacity limit: no limit, can be optional. Measured 512G can store 5.6 billion frames of CAN data.
4. Offline Playback: you can save the data, directly sent back to the CAN bus as is, simulating the device signal.
5. Offline Relay: between CAN1 and CAN2, can be intelligent relay, direct forwarding, or rewriting forwarding.
6. All kinds of CAN lines: support for high-speed / low-speed / fault-tolerant / single-wire CAN / comfort / entertainment CAN lines.
7. Built-in Clock: You can save the received Beijing time for each frame of data.
8. Data Saving Format: txt, csv, asc, CAN.
III. Interfaces
1. POWER:Power switch, mainly for battery power supply.
2. S1-S10:Baud rate and function selection switch.
3. USB:Configure Beijing time/copy TF card data through PC (USB port can not read CAN data in real time).
4. TF Card: standard TF card.
5. LED1-8:LED indicator.
6. +PE-:Switching power input.
7. 1H/1G/1L:CAN1 channel, high-speed CAN, baud rate 10k-1M.
8. 2H/2G/2L:CAN2 channel, high-speed CAN, baud rate 10k-1M.
9. 3H/3G/3L:CAN3 channel, low-speed fault-tolerant CAN, baud rate 10k-125K (Note: CAN3 is the extension of CAN2, CAN2 is not available when CAN3 is enabled).
10. CAN1 120R:CAN1 channel terminal resistance selector switch.
11. CAN2 120R: CAN2 channel terminal resistance selector switch.