Model: MiniPCIe-CAN
Performance and Technical Specifications
USB to CAN bus Protocol Conversion;
2 CAN Interfaces Equipped; Bi-directional transmission, CAN transmit and CAN receive Supported;
Supports CAN2.0A and CAN2.0B protocols, standard and extended frames, data frames and remote frames;
CAN controller baud rate selectable between 10Kbps-1Mbps and configurable via software;
CAN bus interface adopts high-speed magnetic coupling isolation, integrated isolated DC-DC power supply; three-terminal full isolation (PCI bus and CAN bus isolation, isolation between CAN1 and CAN2);
Support Relay Function, transparent transmission function, 2500V isolation between CAN1 and CAN2;
Traffic:Two CAN channels (when running at the same time) reach 8500 frames/s for receiving and 8500 frames/s for transmitting respectively; (two channels receive 8500 frames/s at the same time, and the PCI speed can reach a speed of 17000 frames/s without dropping frames)
PCI ExpressMini interface is directly powered without external power supply;
Passed 2500V isolation withstand voltage test;
Built-in conjugate coil (common mode inductor) to suppress common mode interference and improve anti-interference capability. ;
Supports ISO15765 protocol parsing, CANOpen, J1939, DeviceNet parsing, DBC parsing.
PC interface: 52Pin PCI ExpressMini slot;
CAN interface: 3Pin pitch 1.25mm card socket with its own adapter lead;
Termination Resistor: On-board 120 Ohm termination resistor, can be removed by yourself;
System: windows7/8/10 (32/64bit), Linux (32/64bit);
Operating temperature: -40~85℃;
Case size: 30*51*3mm.
Product compatibility: function library compatible with Guangzhou Chou Li-gong Company ZLG-USBCAN interface adapter.
Complimentary Accessories and Shipping List:
1、MiniPCIe to CAN Mainframe a piece
2、CAN 3P Lead Line Two pieces
3, MiniPCIe to USB Adapter Board a piece
4, USB to the Motherboard Cable 4P a piece
MiniPCIe End Interface Definition
Signal Name | Pin Number | Clarification |
USB_D- | 36 | USB Signal Wire D- |
USB_D+ | 38 | USB Signal Wire D+ |
3.3V | 2、52 | 3.3V Power Supply |
GND | 4、9、18、21、26、27、29、34、35、40、50 | Ground |
Note: Each 3.3V pin on the board requires only one connection for power supply, as does each GND pin. |
CAN Terminal Interface Definition
CAN1 | CAN2 | |||||
GND | CANL | CANH | GND | CANL | CANH | |
Black | Yellow | Red | Black | Yellow | Red |